Skip to main content

© All rights reserved.
Made with ❤ and ☕ by

Parts & Projects

From digital ideas to physical parts: designed, printed and built for real-world use

Smart Gauge CAN Checker showing oil temperature in the Audi TT

Smart Gauge
CAN Checker and Gauge Pod 1.0

Work in progress: a round CAN Checker display in the air vent of the TT, made to work with the Smart Gauge APP.

Smart Gauge APP on a phone and on the Android Auto car screen

Smart Gauge APP

Coming soon: race timer, laps, dyno and car check for any car, with the CAN Checker, OBD or just GPS. Android Auto included.

3D-printed paddle shifters on the steering wheel of the Audi TT

Audi TT 8J Paddle Shifters

Paddle shifters for the S tronic wheel, adapted from a b3sD template and printed in black and neon green.

3D-printed R32 plate in black and neon green on the intake manifold of the VR6

Audi TT 8J R32 Intake Manifold Cover

A carbon-texture plate with a raised neon green R32 logo for the top of the VR6 intake manifold.

3D-printed honeycomb paddle shifters in black and orange for the KIA ProCeed GT

KIA Ceed ProCeed GT (CD) Paddle Shifters

Paddle shifter extensions that slip over the original KIA paddles, in black ASA with the edges in an accent colour.

Neon green 3D-printed honeycomb intake above the grille of the Audi TT

Audi TT 8J Front Grille Air Intake

A honeycomb insert for the slot above the grille. Orange test print first, finished in black and neon green.

Audi TT 8J Air Intake Box

Scanned and modelled with b3sD, printed in glass-fibre reinforced ABS, with a printed adapter ring for the air filter housing.

Audi TT 8J Clubsport Rear Seat Delete

Work in progress: a printed Clubsport-style frame where the rear seats used to be.

Audi TT 8J Airbox Inlet

Feeds the headlight intake straight into the airbox: adapter, TPU hose modelled from a scan, and a TPU cap for when the hose is off.

The printed sound tube cap fitted next to the silicone intake hose

Audi TT 8J Sound Tube Cap

Closes off the sound tube after the swap to a silicone intake hose, hence the mute icon on top.

Audi TT 8J front with the headlight air intake

Audi TT 8J Headlight Air Intake

An air intake duct routed through the headlight opening, with four design iterations in Blender before the first print.

Four gold load resistors in braided wiring with plugs, the finished Magnetic Ride cancellation kit

Audi TT 8J Magnetic Ride Cancellation Kit

A DIY replacement for the KW Magnetic Ride cancellation kit, soldered from four 100 W resistors for under €35.

Neon green velocity stack in the inlet of the R32 air filter housing

Audi TT 8J R32 Velocity Stack

A printed velocity stack for the inlet of the R32 air filter housing, scanned and modelled with b3sD.

The Dani Box sitting in the vape ashtray insert of the Audi TT

Audi TT 8J Dani Box Vape Ashtray Insert

Turns the ashtray into a holder for the Dicodes Dani Box 21700: black ASA, red TPU inlay and a light window.

The printed radiator cover with be quiet! lettering on top of the case

be quiet! Light Base 500 LX Top Radiator Cover

A two-piece cover for the radiator at the top of the case, held together by magnets. The 3D view takes it apart.

be quiet! Light Base 500 LX Side Fan Cover

Covers the side fan bank behind the glass. Two pieces with a carbon texture modelled into the part.

be quiet! Light Base 500 LX Bottom Plate

Five months and several revisions: a floor plate without mounting holes, closed or with a cutout for the 12VHPWR cable.

The white mainboard side cover fitted in the lit case, next to the cable pass-through

be quiet! Light Base 500 LX Mainboard Side Cover

Closes the oversized cable pass-throughs next to the mainboard. It mounts on standoffs under the board.

BMW E60 MagSafe Charger Console Insert

A console insert for the BMW 5 Series E60 with an original Apple MagSafe charger, printed in ASA.

KIA ProCeed GT Centre Console Storage Box

A shallow tray with a coin holder for the deep centre console compartment, printed in black and red ASA.

The Nordschleife wall art glowing green on a dark wall

Nürburgring Nordschleife Wall Art

The Nordschleife as a 61 × 107 cm wall piece in PETG, backlit with an RGBIC strip. Mounts and drilling template are on Thingiverse.

The grim-faced Brickman in his Vikings jersey and 33 cap, holding his friendly spare head

Minnesota Vikings Fan Set

A Minnesota Vikings gift set built around number 33: a 60 cm poseable Brickman, Thor’s hammer, a light box and more.